When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Never change batteries again and avoid catastrophic batteryleaks on your pinball machines' circuit boards!This module replaces the obsolete 5101 RAM chip on your pinball andallows you to remove the batteries while still preserving your high scores andgame adjustments and settings.
This is "Dual CE" compatible, which means itcorrectly implements the logic of the two "Chip Enable" lines thatsome pinball machines use, and some NVRAM vendors do not support in theirproducts.
All NVRAM modules are comprehensively tested with multiplepasses on our custom microprocessor controlled test fixture, which not onlytests every bit of the memory but also powers the chip down after each writeand before each read. This is a test that conventional RAM testerscan't do and is important to ensure that every bit of the memory will work asintended when it's in your pinball machine.
Compatible with:
- Bally Pinball Machines MPU -17, -35, and -133
- Gottlieb Pinball Machines System 80, 80A, 80B
- Stern Pinball Machines MPU-100, MPU-200 except Meteor (2 of these battery eliminators required for MPU-200)
- Williams System 3, 4, 6, 6a, 7
- Arcade Games: Defender, Omega Race
Our NVRAM modules use quality machine pin headers that won'tdestroy your pinball machine's IC socket.
Williams and Gottlieb games shipped from the factory theirRAM chip soldered directly to the board.
The highest quality NVRAM Battery Eliminator at the bestprice! Beware of lower priced knock-offs made with dubiously sourced memory chips!
