When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- 【Clean Intake Valves, Ports & Combustion Area】Use the vehicle’s vacuum system to draw cleaner into the intake tract, helping loosen carbon from intake valves, combustion chambers, and vacuum passages. Ideal for engines that feel rough, sluggish, or down on power between tune-ups.
- 【Restore Smooth Power & MPG】Engines with carbon buildup often idle rough at stoplights, hesitate on takeoff, and feel heavy on hills while burning more fuel. Using this induction service kit regularly helps clean intake deposits so the engine runs smoother, responds quicker, reduces harmful emissions, and can improve gas mileage
- 【Vacuum Gauge for Control and System Check】A liquid-filled gauge displays manifold vacuum while you run the service, helping you monitor engine load and adjust the cleaner flow. It can also be used as a quick reference when checking for vacuum-related driveability issues.
- 【Straightforward to Set Up and Use】Fill the canister with a suitable intake or induction cleaner, connect to an appropriate vacuum line, start the engine, and adjust the valve to control drip rate. The process is simple to learn and can usually be completed in a short service session.
- 【Reusable Canister for Gasoline Engines Only】Designed for gasoline fuel-injection systems and petrol cars; not for diesel injectors or diesel intake service. Works with many popular intake-cleaning solutions (liquid not included), making the canister a reusable tool in your maintenance kit.
Product description Ignite Performance, Save Fue
Fuel Injection Cleaner Canister -
Elevate Your Engine Care to Pro Level
How To Clean Intake Valves without Removing
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. aplus content video
- Rotatable Hook
No need to hold the bottle during the process
- Liquid-filled Gauge
Accurate vacuum reading and monitoring of chemical flow
- Vacuum Hose
No need to disassemble the intake air boot, manifold and other difficult steps
- Quick Connector
Easy to push-on / disconnect the hose
1 Rotatable Hook 2 Liquid-filled Gauge 3 Vacuum Hose 4 Quick Connector Instruction Reagent Filling
Pour the cleaning reagent into the canister, fasten the blue cap and connect the quick coupling.
Detach and Insert
Remove the rubber vacuum hose from the vehicle vacuum system.
Insert the cone tip of the vacuum hose into the vacuum hose.
Ignite Engine
Start the engine, the vacuum meter will indicate -50 cmHg range.
Activate Flow Valve
Turn on the flow valve to allow the reagent into the vacuum system and wait for 7-10 minutes to complete cleaning.
