This item has been shown 25013 times.
International buyers: Please note if you are ordering more than one item from my shop then I can combine the postage costs for you.
Just order everything that you require as normal and then I will calculate postage costs and then send you a refund by PayPal.Due to the problems facing China. The Pico PSU's are currently on backorder. stock isn't expected at least until the middle of March.Please check out my other Sega Dreamcast / Saturn items in my store.
I ALSO SELL A PICO SUPPLY FOR SEGA SATURN CONSOLES VERSIONS, BOTH MODELS 1 AND MODEL 2.
IF YOU ARE PURCHASING FOR A SEGA SATURN, PLEASE LOOK AT MY OTHER ADVERT.
This small power supply is a great alternative to your original power supply which tends to gets quite warm. It gets even hotter if you use a GDEmu.
Pico PSU's are a well tried and tested form of powering anything from consoles to small ATX powered computers. The electronics in this design are more than up to the task of handling a SegaDreamcast or Saturn. You have utmost confidence it will be powered correctly.
This will make sure your Dreamcast runs nice and cool and more efficiently.
Dreamcast PICO Power Supply Unit Modification PCB ready to install.
DC Input: 12V
Output ATX: Max 250W
Standard 24pin ATX Power Connector
Appearance size: 55*35*13mm; PCB size: 55*22mm
Input Current: Max. 17A
Output ATX: 250W
Output Current +12V: 8A
Output Current +5V: 8A
Output Current +3.3V: 8A
Output Current +5VSB: 1.5A
Output Current -12V: 0.1A
Output Power: 250WThis PICO PSU is a professionally manufactured Printed Circuit Board.A six pin header ready to push onto motherboard.
Screws down securely in place using one of the pre-existing mounting holes.
All you need to do is connect your existing ON/OFF switch into the connector fitted to the PCBand your are done!
This adapter is truly PLUG and PLAY! No soldering required. Takes just a few minutes to install.
Optional cable adapter included....this can be plugged directly onto the PICO PSU and provide extra 5 volt& 12 volt supply feeds. This is extremely useful if you are modding your console with extra features eg. LED lighting etcPCB, PICO Board and Plastic power mount are all included!
You will need to buy an appropriate 12 Volt Power Supply Unit with the correct size plug.
Size of Connector： 5.5 x 2.5mm (12 volt and minimum of 4 amp supply)
A good quality Power Supply transformer is recommended. Some of the cheaper ones can produce Television interference.
I recommend purchasing this one from Amazon:
Leicke PSU Power Supply 48W | 12V 4A 5.5 * 2.5 mm | Compatible with picoPSU, Routers, LED Strips, TFTs & LDC DisplaysDEFAULT COLOUR IS BLACK
If you would like a different power connector colour, please let me know.
You can choose: WHITE, BLUE, ORANGE, YELLOW, RED, GREY, GREEN, PINK, PURPLE.NO DREAMCAST CONSOLE IS INCLUDED IN THIS PURCHASE.
PLEASE CHECK OUT MY response FOR THIS PRODUCT.
Many thanks go to "collingall" for the original design of the power connector head and also "©chriz2600" for the PCB design.